STMicro STSPIN32G0 是一系列新的高級三相電機控制器，可變電壓范圍為 45V 至 600V，通過集成 MCU 和電機驅動器擴展了 STMicro 的器件產品組合。

[]

新系列將三半橋柵極驅動器與基于 Arm Cortex-M0+ 的 [STM32G0] 微控制器相結合，能夠處理六步和磁場定向控制 （FOC） 算法。STSPIN32G0 系列的集成設計可節省成本，并“在不影響性能和穩健性的情況下顯著減少 BOM 面積”。

STSPIN32G0 系列有兩個主要版本，低壓和高壓。低壓 3 相電機控制器包括一個穩壓器、一個或三個分流器以及一個額定電壓為 45V、電流高達 0.6A 的柵極驅動器。它們主要針對家用電器、電動工具和無人機。高壓版本可以處理 250V 或 600V，使其適用于工業逆變器和風扇。它們針對家用電器、空調、家用和工業冰箱、工業泵和工業自動化。

STSPIN32G0A1/A2/B1/B2 ( low-voltage ) specifications:

• MCU – [Arm Cortex-M0+] 32-bit core @ up to 64MHz
• Memory – 64KB flash memory and 8KB SRAM
• Motor Control
  • Operating voltage from 6.7 to 45 V
  • Three-phase gate drivers
    • 600 mA sink/source
    • Integrated bootstrap diodes
    • Cross-conduction prevention
• Peripherals
  • I2C, USART, and SPI interfaces
  • 23x GPIO
  • Timers – 5x general-purpose timers (1x 32-bit + 4x 16-bit), 1x advanced-control timer dedicated for motor control
  • Analog – 1x comparator, 12-bit ADC (up to 11 external channels) with 2.5 Msps conversion rate, 3x rail-to-rail operation amplifiers
• 5-channel DMA controller with flexible mapping
• Power
  • 3.3. V DC-DC buck converter regulator with overcurrent, short-circuit, and thermal protection
  • 12 V LDO linear regulator with thermal protection
  • Standby mode for low power consumption
  • UVLO protection on each power supply
• Debugging – On-chip debug support via SWD and embedded bootloader through UART and I2C
• Operating Temperature – -40°C to 125°C
• Package –VFQFPN48 (7mm x 7mm)

STSPIN32G0251/252/601/602 ( high-voltage ) specifications:

• MCU – Arm Cortex-M0+ 32-bit core @ up to 64MHz
• Memory – 64KB flash memory and 8KB SRAM
• Motor Control
  • Operating voltage from 6.7 to 45 V
  • Three-phase gate drivers
    • High-voltage rail up to 250 V (STSPIN32G0251/252)
    • High-voltage rail up to 600 V (STSPIN32G0601/602)
    • dV/dt transient immunity ±50 V/ns
    • Gate driving voltage range from 9 V to 20 V
    • Integrated bootstrap diodes
  • Driver current capability: 200/350 mA source/sink current @ 25 °C
• Peripherals
  • I2C, USART, and SPI interfaces
  • 32x GPIO
  • Timers – 5x general-purpose timers (1x 32-bit + 4x 16-bit), 1x advanced-control timer dedicated for motor control, 2 low-power timers
  • Analog – 1x comparator, 12-bit ADC (up to 15 external channels) with 2 Msps conversion rate
  • 5-channel DMA controller with flexible mapping
  • Standby mode for low power consumption
  • Protection – UVLO, interlocking, deadtime, and smart shutdown
• Debugging – On-chip debug support via SWD and embedded bootloader through UART and I2C
• Operating Temperature – -40°C to 125°C
• Package – QFN 72-pin (10 x 10 mm), 0.5 pitch

Part numbers ending in “1” have fewer pins than those ending in “2.” However, they support Vbat as a backup to Vdd, ensuring the system can resume operations after power loss, or provide Vref, maintaining a stable ADC reference.

[]
EVSPIN32G06Q1S1 3-phase complete inverter board based on the STSPIN32G0601 controller

STMicro offers an evaluation board for each product variant and compatibility with software tools such as the X-CUBE-MCSDK and STM32CubeMX configurator.