在线观看www成人影院-在线观看www日本免费网站-在线观看www视频-在线观看操-欧美18在线-欧美1级

企業號介紹

全部
  • 全部
  • 產品
  • 方案
  • 文章
  • 資料
  • 企業

華秋商城

元器件現貨采購/代購/選型一站式BOM配單

可獲得潛在客戶線索數量99+立即解鎖

1.8w 內容數 99w+ 瀏覽量 192 粉絲

TILMH0030串行數字接口 (SDI) IC

--- 產品詳情 ---

具有視頻和輔助數據 FIFO 及集成電纜驅動器的 SMPTE 292M/259M 數字視頻串行器
Function Serializer
Power consumption (mW) 430
Data rate (Max) (Gbps) 1.485
Control interface Pin/I2C
Operating temperature range (C) 0 to 70
  • SDTV/HDTV Serial Digital Video Standard Compliant
  • Supports 270 Mbps, 360 Mbps, 540 Mbps, 1.4835Gbps and 1.485 Gbps SDV Data Rates with Auto-Detection
  • Low Output Jitter: 125ps max, 85ps typical
  • Low Power: Typically 430mW
  • No External Serial Data Rate Setting or VCO Filtering Components Required*
  • Fast PLL Lock Time: < 150μs Typical at 1.485 Gbps
  • Adjustable Depth Video FIFO for Timing Alignment
  • Built-in Self-Test (BIST) and Video Test Pattern Generator (TPG)* * Patent applications made or pending.
  • Automatic EDH/CRC Word and Flag Generation and Insertion
  • On-Chip Ancillary Data FIFO and Insertion Control Circuitry
  • Flexible Control and Configuration I/O Port
  • LVCMOS Compatible Data and Control Inputs and Outputs
  • 75? ECL-Compatible, Differential, Serial Cable-Driver Outputs
  • 3.3V I/O Power Supply and 2.5V Logic Power Supply Operation
  • 64-pin TQFP Package

All trademarks are the property of their respective owners.

The LMH0030 SMPTE 292M/259M Digital Video Serializer with Ancillary Data FIFO and Integrated Cable Driver is a monolithic integrated circuit that encodes, serializes and transmits bit-parallel digital video data conforming to SMPTE 125M and 267M standard definition, 10-bit wide component video and SMPTE 260M, 274M, 295M and 296M high-definition, 20-bit wide component video standards. The LMH0030 operates at SMPTE 259M serial data rates of 270 Mbps, 360 Mbps, the SMPTE 344M serial data rate of 540 Mbps, and the SMPTE 292M serial data rates of 1483.5 and 1.485 Gbps. The serial data clock frequency is internally generated and requires no external frequency setting, trimming or filtering components.

The LMH0030 performs functions which include: parallel-to-serial data conversion, SMPTE standard data encoding, NRZ to NRZI data format conversion, serial data clock generation and encoding with the serial data, automatic video rate and format detection, ancillary data packet management and insertion, and serial data output driving. The LMH0030 has circuitry for automatic EDH/CRC character and flag generation and insertion per SMPTE RP-165 (standard definition) or SMPTE 292M (high definition). Optional LSB dithering is implemented which prevents pathological pattern generation. Unique to the LMH0030 are its video and ancillary data FIFOs. The video FIFO allows the video data to be delayed from 0 to 4 parallel data clock periods for video timing purposes. The ancillary data port and on-chip FIFO and control circuitry store and insert ancillary flags, data packets and checksums into the ancillary data space. The LMH0030 also has an exclusive built-in self-test (BIST) and video test pattern generator (TPG) with SD and HD component video test patterns: reference black, PLL and EQ pathologicals and color bars in 4:3 and 16:9 raster formats for NTSC and PAL standards*. The color bar patterns feature optional bandwidth limiting coding in the chroma and luma transitions.

The LMH0030 has a unique multi-function I/O port for immediate access to control and configuration settings. This port may be programmed to provide external access to control functions and indicators as inputs and outputs. The designer can thus customize the LMH0030 to fit the desired application. At power-up or after a reset command, the LMH0030 is auto-configured to a default operating condition. Separate power pins for the output driver, PLL and the serializer improve power supply rejection, output jitter and noise performance.

The LMH0030's internal circuitry is powered from +2.5V and the I/O circuitry from a +3.3V supply. Power dissipation is typically 430mW at 1.485 Gbps including two 75? AC-coupled and back-matched output loads. The device is packaged in a 64-pin TQFP.

為你推薦

  • 如何利用運算放大器設計振蕩電路?2023-08-09 08:08

    使用運算放大器設計振蕩電路運算放大器的工作原理發明運算放大器的人絕對是天才。中間兩端接上電源,當同相輸入大于反相輸入,右側就會輸出(接近)電源電壓(Vcc),如果反過來小于同相輸入,則輸出0V(負電源)電壓。在輸出端接上燈泡,假設我想控制燈泡循環亮滅,那就需要一會輸出高電平點亮,一會輸出低電平熄滅。也就是我需要讓左邊能自動變化大小,就能實現控制燈泡。如何讓電
  • 【PCB設計必備】31條布線技巧2023-08-03 08:09

    相信大家在做PCB設計時,都會發現布線這個環節必不可少,而且布線的合理性,也決定了PCB的美觀度和其生產成本的高低,同時還能體現出電路性能和散熱性能的好壞,以及是否可以讓器件的性能達到最優等。在上篇內容中,小編主要分享了PCB線寬線距的一些設計規則,那么本篇內容,將針對PCB的布線方式,做個全面的總結給到大家,希望能夠對養成良好的設計習慣有所幫助。1走線長度
  • 電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08

    大功率直流充電系統架構大功率直流充電設計標準國家大功率充電標準“Chaoji”技術標準設計目標是未來可實現電動汽車充電5分鐘行駛400公里。“Chaoji”技術標準主要設計參數如下:最大電壓:目前1000V(可擴展到1500V);最大電流:帶冷卻系統500A(可擴展到600A);不帶冷卻系統150-200A;最大功率:900KW。大功率直流充電系統架構大功率
  • Buck電路的原理及器件選型指南2023-07-31 22:28

    Buck電路工作原理電源閉合時電壓會快速增加,當斷開時電壓會快速減小,如果開關速度足夠快的話,是不是就能把負載,控制在想要的電壓值以內呢?假設12V降壓到5V,也就意味著,MOS管開關需要42%時間導通,58%時間斷開。當42%時間MOS管導通時,電感被充磁儲能,同時對電容進行充電,給負載提供電量。當58%時間MOS管斷開時,由于電感上的電流不能突變,電路通
    1960瀏覽量
  • 100W USB PD 3.0電源2023-07-31 22:27

    什么是PD3.0快充?PD快充協議全稱“USBPowerDelivery”功率傳輸協議,簡稱為“PD協議”。2015年11月,USBPD快充迎來了大版本更新,進入到了USBPD3.0快充時代。USBPD3.0相對于USBPD2.0的變化主要有三方面:增加了對設備內置電池特性更為詳細的描述;增加了通過PD通信進行設備軟硬件版本識別和軟件更新的功能,以及增加了數
    1484瀏覽量
  • 千萬不要忽略PCB設計中線寬線距的重要性2023-07-31 22:27

    想要做好PCB設計,除了整體的布線布局外,線寬線距的規則也非常重要,因為線寬線距決定著電路板的性能和穩定性。所以本篇以RK3588為例,詳細為大家介紹一下PCB線寬線距的通用設計規則。要注意的是,布線之前須把軟件默認設置選項設置好,并打開DRC檢測開關。布線建議打開5mil格點,等長時可根據情況設置1mil格點。PCB布線線寬01布線首先應滿足工廠加工能力,
  • 基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02

    如何驅動無刷電機?近些年,由于無刷直流電機大規模的研發和技術的逐漸成熟,已逐步成為工業用電機的發展主流。圍繞降低生產成本和提高運行效率,各大廠商也提供不同型號的電機以滿足不同驅動系統的需求。現階段已經在紡織、冶金、印刷、自動化生產流水線、數控機床等工業生產方面應用。無刷直流電機的優點與局限性優點:高輸出功率、小尺寸和重量、散熱性好、效率高、運行速度范圍寬、低
  • 上新啦!開發板僅需9.9元!2023-06-21 17:43

    上新啦!開發板僅需9.9元!
  • 參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43

    什么是數字電源?數字電源,以數字信號處理器(DSP)或微控制器(MCU)為核心,將數字電源驅動器、PWM控制器等作為控制對象,能實現控制、管理和監測功能的電源產品。它是通過設定開關電源的內部參數來改變其外特性,并在“電源控制”的基礎上增加了“電源管理”。所謂電源管理是指將電源有效地分配給系統的不同組件,最大限度地降低損耗。數字電源的管理(如電源排序)必須全部
    1752瀏覽量
  • 千萬不能小瞧的PCB半孔板2023-06-21 17:34

    PCB半孔是沿著PCB邊界鉆出的成排的孔,當孔被鍍銅時,邊緣被修剪掉,使沿邊界的孔減半,讓PCB的邊緣看起來像電鍍表面孔內有銅。模塊類PCB基本上都設計有半孔,主要是方便焊接,因為模塊面積小,功能需求多,所以通常半孔設計在PCB單只最邊沿,在鑼外形時鑼去一半,只留下半邊孔在PCB上。半孔板的可制造性設計最小半孔最小半孔的工藝制成能力是0.5mm,前提是孔必須
    2821瀏覽量
主站蜘蛛池模板: 欧美综合国产精品日韩一 | 免费又黄又爽1000禁片 | 国产精品四虎 | 永久免费在线观看视频 | 精品国产免费观看一区高清 | 中文字幕国产一区 | 女bbbbxxxx另类亚洲 | 四虎精品成人a在线观看 | 一区二区中文字幕亚洲精品 | 嘿嘿嘿视频在线观看网站 | 韩国三级视频在线观看 | 在线观看精品视频看看播放 | 操碰视频在线 | 奇米影视777欧美在线观看 | 久久久精品免费国产四虎 | bt 另类 专区 欧美 制服 | 天天操天天干天天操 | 午夜精品久久久久久毛片 | 九色愉拍自拍 | 国产床戏无遮掩视频播放 | 韩日色图 | 成人丁香乱小说 | 嘿嘿嘿视频在线观看网站 | 天堂网成人 | 日本免费黄网站 | 日韩一区二区视频 | 亚洲综合激情 | 综合精品 | 亚洲国产综合视频 | 狠狠狠 | 国内黄色精品 | 日韩毛片免费看 | 欧美日本一区二区三区生 | 伊人成综合| 国产网站免费看 | 2022天天干| 色多多影视 | 国产成人综合网 | 噜噜爽 | 欧美在线伊人 | 免费看黄色毛片 |