| Vin (Min) (V) | 5.5 |
| Vin (Max) (V) | 36 |
| Vout (Min) (V) | 1.23 |
| Vout (Max) (V) | 31 |
| Iout (Max) (A) | 1 |
| Iq (Typ) (uA) | 3000 |
| Switching frequency (Min) (kHz) | 500 |
| Switching frequency (Max) (kHz) | 500 |
| Features | Enable, Over Current Protection |
| Rating | HiRel Enhanced Product |
| Regulated outputs (#) | 1 |
| Control mode | Voltage Mode |
| Duty cycle (Max) (%) | 87.5 |
- Wide Input Voltage Range: 5.5 V to 36 V
- Up to 1-A Continuous (1.2-A Peak) Output Current
- High Efficiency up to 95% Enabled by 110-m
Integrated MOSFET Switch - Wide Output Voltage Range: Adjustable Down
to 1.22 V with 1.5% Initial Accuracy - Internal Compensation Minimizes External
Parts Count - Fixed 500-kHz Switching Frequency for Small
Filter Size - Improved Line Regulation and Transient
Response by Input Voltage Feed Forward - System Protected by Over Current Limiting, Over
Voltage Protection and Thermal Shutdown - ?55°C to 125°C Operating Junction
Temperature Range - Available in Small 8-Pin SOIC Package
- For SWIFT Documentation, Application Notes and Design
Software, See the TI Website at www.ti.com/swift - SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (?55°C/125°C)
Temperature Range(1) - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
(1) Additional temperature ranges are available - contact factory
SWIFT is a trademark of Texas Instruments.
As a member of the SWIFT? family of DC/DC regulators, the TPS5410 is a high-output-current PWM converter that integrates a low resistance high side N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 μA typically. Other features include an active high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5410 feedback loop is internally compensated.
The TPS5410 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and software tools to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
