| Iout (Max) (A) | 30 |
| Vin (Min) (V) | 4.5 |
| Vin (Max) (V) | 5.5 |
| Vout (Min) (V) | 0.8 |
| Vout (Max) (V) | 3.6 |
| Soft start | Fixed |
| Features | Enable, Output Discharge, Tracking |
| Iq (Typ) (uA) | 100000 |
| Regulated outputs (#) | 1 |
| Switching frequency (Max) (kHz) | 325 |
| Switching frequency (Min) (kHz) | 275 |
| Duty cycle (Max) (%) | 100 |
| Topology | Buck |
- Up to 30 A Output Current
- 5-V Input Voltage
- Wide-Output Voltage Adjust (0.8 V to 3.6 V)
- 180 W/in3 Power Density
- On/Off Inhibit
- Efficiencies up to 94%
- Pre-Bias Startup
- Margin Up/Down Controls
- Under-Voltage Lockout
- Auto-Track? Sequencing
- Output Over-Current Protection (Non-Latching, Auto-Reset)
- Over-Temperature Protection
- Operating Temp: –40 to +85°C
- Safety Agency Approvals:
UL 1950, CSA 22.2 950, EN60950 VDE (Pending) - Point-of-Load Alliance (POLA) Compatible
The PTH05030 is a high-current non-isolated power modules from Texas Instruments. This product is characterized by high efficiencies, and up to 30 A of output current, while occupying a mere 1.64 in2 of PCB area. In terms of cost, size, and performance, the series provides OEM?s with a flexible module that meets the requirements of the most complex and demanding mixed-signal applications. These include the most densly populated, multi-processor systems that incorporate high-speed DSP?s, microprocessors, and ASICs.
The series uses double-sided surface mount construction and provides high-performance step-down power conversion from a 5-V input bus voltage. The output voltage of the PTH05030W can be set to any value over the range 0.8 V to 3.6 V, using a single resistor.
This series includes Auto-Track?. Auto-Track simplifies power-up and power-down supply voltage sequencing in a system by enabling modules to track each other, or any other external voltage.
Each model also includes an on/off inhibit, output voltage adjust (trim), and margin up/down controls. An output voltage sense ensures tight load regulation, and an output over-current and thermal shutdown feature provide for protection against external load faults.
Package options inlude both through-hole and surface mount connfigurations.
