資料介紹
Operating from a 1.8V single power supply, the MAX9509/
MAX9510 amplify standard-definition video signals and
only consume 5.8mW quiescent power and 11.7mW
average power. The MAX9509/MAX9510 leverage
Maxim’s DirectDrive? technology to generate a clean,
internal negative supply. Combining the internal negative
power supply with the external positive 1.8V supply,
the MAX9509/MAX9510 are able to drive a 2VP-P
video signal into a 150Ω load.
Besides increasing the output voltage range, Maxim’s
DirectDrive technology eliminates large output-coupling
capacitors and sets the output video black level near
ground. DirectDrive requires an integrated charge pump
and an internal linear regulator to create a clean negative
power supply so that the amplifier can pull the sync
below ground. The charge pump injects little noise into
the video output, making the picture visibly flawless.
The MAX9509/MAX9510 are designed to operate from the
1.8V digital power supply. The high power-supply rejection
ratio (49dB at 100kHz) allows the MAX9509/
MAX9510 to reject the noise from the digital power supply.
The MAX9509 features an internal reconstruction filter
that smoothes the steps and reduces the spikes on the
video signal from the video digital-to-analog converter
(DAC). The reconstruction filter typically has ±1dB
passband flatness of 8.1MHz and 46dB attenuation at
27MHz. The large-signal, ±1dB passband flatness of
the MAX9510 video amplifier is typically 8.4MHz, and
the large signal -3dB frequency is typically 11.4MHz.
The input of the MAX9509/MAX9510 can be directly
connected to the output of a video DAC. The MAX9509/
MAX9510 also feature a transparent input sync-tip
clamp, allowing AC-coupling of input signals with different
DC biases. The MAX9509/MAX9510 have an internal
fixed gain of 8. The input full-scale video signal is
nominally 0.25VP-P, and the output full-scale video signal
is nominally 2VP-P. The devices operate from a 1.8V
or 2.5V single supply and feature a 10nA low-power
shutdown mode. The MAX9509 is offered in an 8-pin
TDFN package and the MAX9510 is offered in an 8-pin
μMAX? package.
MAX9510 amplify standard-definition video signals and
only consume 5.8mW quiescent power and 11.7mW
average power. The MAX9509/MAX9510 leverage
Maxim’s DirectDrive? technology to generate a clean,
internal negative supply. Combining the internal negative
power supply with the external positive 1.8V supply,
the MAX9509/MAX9510 are able to drive a 2VP-P
video signal into a 150Ω load.
Besides increasing the output voltage range, Maxim’s
DirectDrive technology eliminates large output-coupling
capacitors and sets the output video black level near
ground. DirectDrive requires an integrated charge pump
and an internal linear regulator to create a clean negative
power supply so that the amplifier can pull the sync
below ground. The charge pump injects little noise into
the video output, making the picture visibly flawless.
The MAX9509/MAX9510 are designed to operate from the
1.8V digital power supply. The high power-supply rejection
ratio (49dB at 100kHz) allows the MAX9509/
MAX9510 to reject the noise from the digital power supply.
The MAX9509 features an internal reconstruction filter
that smoothes the steps and reduces the spikes on the
video signal from the video digital-to-analog converter
(DAC). The reconstruction filter typically has ±1dB
passband flatness of 8.1MHz and 46dB attenuation at
27MHz. The large-signal, ±1dB passband flatness of
the MAX9510 video amplifier is typically 8.4MHz, and
the large signal -3dB frequency is typically 11.4MHz.
The input of the MAX9509/MAX9510 can be directly
connected to the output of a video DAC. The MAX9509/
MAX9510 also feature a transparent input sync-tip
clamp, allowing AC-coupling of input signals with different
DC biases. The MAX9509/MAX9510 have an internal
fixed gain of 8. The input full-scale video signal is
nominally 0.25VP-P, and the output full-scale video signal
is nominally 2VP-P. The devices operate from a 1.8V
or 2.5V single supply and feature a 10nA low-power
shutdown mode. The MAX9509 is offered in an 8-pin
TDFN package and the MAX9510 is offered in an 8-pin
μMAX? package.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX6369–MAX6374 datasheet pdf
- MAX6033 datasheet pdf
- MAX1684,MAX1685 datasheet pdf
- MAX1647,MAX1648 datasheet pdf
- MAX1645,MAX1645A datasheet pdf
- MAX481,MAX483,MAX485,MAX487–MAX491 datasheet pdf
- MAX700,MAX701,MAX702 datasheet
- MAX603,MAX604 datasheet pdf
- MAX690, MAX691, MAX692 pdf dat
- MAX130, MAX131 pdf datasheet (
- MAX121 pdf datasheet (308ksps
- MAX9928, MAX9929 pdf datasheet
- MAX3244 pdf datasheet (RS-232
- MAX516 pdf datasheet
- MAX514 pdf datasheet
- max30100和max30102的區別 4406次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2109次閱讀
- MAX2309/MAX2312,190MHz IF,用于WCDMA 631次閱讀
- 調整MAX8660/MAX8661的輸出電壓 839次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.4w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5133次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1755次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 1782次閱讀
- MAX5134-MAX5137內最小的16位DAC 1724次閱讀
- MAX4751,MAX4752,MAX4753低電壓、單電源、四路SPST模擬開關 1w次閱讀
- MAX705-MAX708,MAX813低成本、微處理器監控電路 5560次閱讀
- MAX4617-MAX4619低電壓、CMOS模擬多路復用器/開關 6145次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2036次閱讀
- MAX5970應用電路 2656次閱讀
下載排行
本周
- 1SMD LED選型手冊 貼片燈珠
- 5.47 MB | 3次下載 | 免費
- 2加密芯片的一種破解方法和對應加密方案改進設計
- 0.29 MB | 1次下載 | 免費
- 3明緯S-50-24開關電源電路圖.pdf
- 0.10 MB | 1次下載 | 5 積分
- 4多功能MPU芯片GC9005數據手冊
- 2.67 MB | 1次下載 | 免費
- 5碳化硅逆變焊機基本產品介紹
- 7.35 MB | 1次下載 | 免費
- 6基本半導體產品在Sic逆變焊機中的應用
- 7.27 MB | 1次下載 | 免費
- 7基本半導體產品在125kW工商業儲能PCS中的應用
- 10.74 MB | 1次下載 | 免費
- 8MOSFET參數解讀
- 1.59 MB | 1次下載 | 2 積分
本月
- 1使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 23314A函數發生器維修手冊
- 16.30 MB | 13次下載 | 免費
- 3TPS54202H降壓轉換器評估模塊用戶指南
- 1.02MB | 9次下載 | 免費
- 4美的電磁爐維修手冊大全
- 1.56 MB | 9次下載 | 5 積分
- 5STM32F101x8/STM32F101xB手冊
- 1.69 MB | 8次下載 | 1 積分
- 6使用TL431設計電源
- 0.67 MB | 7次下載 | 免費
- 7感應筆電路圖
- 0.06 MB | 7次下載 | 免費
- 8不對稱半橋(AHB)反激變換器的分析與設計
- 0.68 MB | 6次下載 | 1 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935119次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73807次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65987次下載 | 10 積分
評論
查看更多