資料介紹
Enabling New Infotainment-Equipment Cost Structures With Open-System Architectures:The infotainment systems of original equipment manufacturers (OEMs) recently have been subjected to increasing competition from the retrofitting solutions on the so-called aftermarket, for which there is at present no adequate
response. A similar situation has always been the case with car radios, where retrofitted units have long had an
obviously better price/performance ratio, not only in the low-price segment but even among very high-quality
systems.
Are Traditional Auto Microcontrollers Being Displaced From Infotainment Units?
Automotive suppliers have drawn their conclusions, and now serve not only the established manufacturers, but also to
a significant extent, the aftermarket, so as not to lose out to companies in the entertainment electronics industry. On
the other hand, the car manufacturers, not wishing to miss out on the lucrative original infotainment business, were
obliged to force the development of these systems. There was no way to win the price war over car radios. The
quality standard of integrated systems, which the buyer associates directly with the vehicle brand, must be higher out
of necessity than is the case with comparable aftermarket units. The manufacturers therefore created the
distinguishing feature of stylistic integration in the brand-specific car interior, which aftermarket systems by nature
cannot offer. In the premium sector, the media-orientated system transport (MOST) bus—optical-fiber cabling
previously unknown in the entertainment-electronics area—was introduced.
It was also in this premium sector that GPS-supported vehicle navigation was established as a distinguishing feature.
It did not, however, take the entertainment-electronics industry long to catch up and be in a position to offer units with
astonishing performance for a fraction of the price of integrated systems. Today, even the close meshing with sensors
that are integrated in the vehicle can be more or less compensated for by retrofitted units, without having to alter the long-term price relationship.
response. A similar situation has always been the case with car radios, where retrofitted units have long had an
obviously better price/performance ratio, not only in the low-price segment but even among very high-quality
systems.
Are Traditional Auto Microcontrollers Being Displaced From Infotainment Units?
Automotive suppliers have drawn their conclusions, and now serve not only the established manufacturers, but also to
a significant extent, the aftermarket, so as not to lose out to companies in the entertainment electronics industry. On
the other hand, the car manufacturers, not wishing to miss out on the lucrative original infotainment business, were
obliged to force the development of these systems. There was no way to win the price war over car radios. The
quality standard of integrated systems, which the buyer associates directly with the vehicle brand, must be higher out
of necessity than is the case with comparable aftermarket units. The manufacturers therefore created the
distinguishing feature of stylistic integration in the brand-specific car interior, which aftermarket systems by nature
cannot offer. In the premium sector, the media-orientated system transport (MOST) bus—optical-fiber cabling
previously unknown in the entertainment-electronics area—was introduced.
It was also in this premium sector that GPS-supported vehicle navigation was established as a distinguishing feature.
It did not, however, take the entertainment-electronics industry long to catch up and be in a position to offer units with
astonishing performance for a fraction of the price of integrated systems. Today, even the close meshing with sensors
that are integrated in the vehicle can be more or less compensated for by retrofitted units, without having to alter the long-term price relationship.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 2015 TI 汽車應用處理器 Infotainment 與 ADAS 方案網上展示會
- 現代UPS電源及電路圖集new
- placement new詳解 0次下載
- Designing with a New Super Fast 0次下載
- Topics on Using the LM6181-A New 0次下載
- Safetosleep安寶睡智能床墊NEW 0次下載
- New Enhanced Agilent Nano Suit
- Automotive Infotainment Power
- NEW POLYMERS FOR IMPROVED FLOC
- New Measurement Requirements f
- 汽車之電源 Automotive Infotainment
- The New Personal International
- What’s New in PADS 9.0 0次下載
- Research for new method for hi
- mpeg-4技術白皮書 (MPEG-4 Technologi
- GVIM基礎用法的三種工作模式 2174次閱讀
- Object o = new Object() 占用多少字節? 393次閱讀
- new ArrayList不當導致CPU飆升 414次閱讀
- Java反射技術實現對象的創建 2336次閱讀
- new和malloc函數詳細分析底層邏輯 732次閱讀
- 寬禁帶器件和仿真環境介紹 1582次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1408次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1712次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 1058次閱讀
- 鋰電池并聯充電時保護板均衡原理 3.2w次閱讀
- 采用保護層頻率量化方法(簡稱HALOPA方法)對頻率進行量化 9252次閱讀
- 更小更智能的電機控制器推進HEV/EV市場 1183次閱讀
- 10大新造車勢力的「車載系統」有何差異?這10組圖片說明了一切 2547次閱讀
- 了解一下比較復雜也非常神秘的new 3656次閱讀
- 簡單地描述了如何用機器學習繞過E-ZPass New York網站的驗證碼 6386次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 92次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 10次下載 | 免費
- 6基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 7藍牙設備在嵌入式領域的廣泛應用
- 0.63 MB | 3次下載 | 免費
- 89天練會電子電路識圖
- 5.91 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233045次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多