讓您的汽車與恩智浦的Kinetis電機套件運行

　　無刷直流電機（BLDC）、永磁同步電機（PMSM）現在在許多應用的青睞，但控制軟件運行可以是艱巨的實施。Kinetis電機套件NXP的橋梁的差距與嵌入式控制軟件，減少軟件的復雜性和加快發展過程中的一個直觀的圖形用戶界面。

　　本文將提供一個簡短的介紹BLDC和永磁同步電機電機的建設和關鍵操作參數，才進入如何驅動他們。然后，它將討論為什么軟件是復雜的，如何管理，和一些硬件選項。然后看看如何獲得項目和NXP的Kinetis電機套件運行。

　　Three-phase brushless DC motors （BLDC） and their close cousins， permanent magnet synchronous motors （PMSMs）， have become industry workhorses in the last decade as the cost of their control electronics has decreased dramatically and new control algorithms have proliferated. BLDC motors offer high reliability， high efficiency and high power-to-volume ratio. They can run at high speed （greater than 10，000 rpm）， have low rotor inertia allowing for quick acceleration， deceleration and quick reverse， and have high power density， packing a lot of torque into compact sizes. Today， they are used in any number of applications， including fans， pumps， vacuums， quadcopters and medical devices， to name just a few.

　　PMSMs have similar construction to the BLDC with a wound stator and permanent magnet rotor， but the stator construction and winding is more similar to an AC induction motor， producing a sinusoidal flux density in the air gap. PMSMs run synchronously with the applied 3-phase AC voltage and have higher power density than AC induction motors because no stator power is going towards inducing the magnetic field in the rotor. Today’s designs are also more powerful while having a lower mass and moment of inertia， making them attractive for industrial drives， traction applications and appliances.