資料介紹
軟件簡介
OpenWrt Node.js Packages (nodejs)
Description
OpenWrt/LEDE Node.js Packages : for Head (Development branch)
Note: support arches are aarch64, arm, x86_64
MIPS without hardware FPU no longer be supported
License
See LICENSE file.
Usage
Add the following line to feeds.conf or feeds.conf.default.
src-git node https://github.com/nxhack/openwrt-node-packages.git
Run
./scripts/feeds update node
rm ./package/feeds/packages/node
rm ./package/feeds/packages/node-*
./scripts/feeds install -a -p node
make defconfig
Request to add a package is welcome
If you want a new module (native module) that requires a precompiled binary, please open the issue.
Note
If you want to use with Chaos Calmer(15.05), see for-15.05 branch (End of life)
If you want to use with LEDE (17.01), see lede-17.01 branch (End of life)
If you want to use with 18.06, see openwrt-18.06 branch (End of life)
If you want to use with 19.07, see openwrt-19.07 branch (MIPS FPU EMULATOR support)
If you want to use with 21.02, see openwrt-21.02 branch (MIPS is no longer supported)
OpenSSL 1.0.x becomes EoL, OpenWrt-18.06 will not be supported. Python2 becomes EoL, node v8.x will not be supported.
On the host side, the following preparations are required.
- Unix prerequisites
- To build a 32-bit target, gcc-multilib, g++-multilib are required.
- The libatomic package is required. (Install the 32-bit library at the same time, if necessary).
Illegal instruction issue
V8 JIT code generates FP instruction. Node.js does not work without hardware FPU.
If you are running nodejs on the Atheros AR71xx/AR933x, MediaTek MT76x8, it will not work because there is no hardware FPU. ARM cores without vfp or neon (such as bcm53xx) will not work either.
Enable Inspector
Processor | ICU | Inspector |
---|---|---|
32bit | Disable | NO |
32bit | small-icu | YES |
64bit | Disable | NO |
64bit | small-icu | YES |
64bit | system-icu | YES |
Debugging Guide Nice to use Chrome DevTools.
Note: ICU currently supports only LITTLE ENDIAN.
Note about mDNS and homebridge
If you use node-homebridge(node-hap-nodejs), please install mDNS package (umdns / avahi-dbus-daemon / mdnsresponder).
(1) Some OpenWrt / Lede images have built in dnscrypt-proxy package, which by default listening on 5353 port.
In that case, installed avahi-daemon will not start on ipv4 interface, only on ipv6 because ipv4 port is taken.
This will lead to strange issue: your homebrdge accessory will be visible in 'Home' app, but can't finish pairing.
To fix this, you have to stop and disable dnscrypt-proxy
Also, you have to enable: dbus and avahi-daemon services to start automatically, i.e for Lede:
/etc/init.d/dbus enable
/etc/init.d/avahi-daemon enable
(2) avahi on home network
Please read this document. 'Why avahi and bonjour don't work on your home network'
IGMP-querier will solve your problem.
OpenWrt custom packages available: https://github.com/nxhack/openwrt-custom-packages
Low memory
Specify v8-options.
--max_old_space_size=80
Or use swap.
Modules that use pre-compiled binary (native module)
node-authenticate-pam
node-aws-crt
node-bcryp
node-bignum
node-bluetooth-hci-socket
node-bufferutil
node-deasync
node-ejdb2_node
node-epoll
node-expat
node-ffi-napi (ffi-napi, ref-napi)
node-fuse-bindings
node-hid
node-pty-prebuilt-multiarch
node-i2c-bus
node-leveldown
node-megahash
node-mdns
node-net-ping (raw-socket)
node-openzwave-shared
node-pi-spi
node-pty
node-rpio
node-serialport-bindings
node-sleep
node-spi-device
node-sqlite3
node-statvfs
node-ubus
node-usb
node-utf-8-validate
node-zigbee2mqtt (@serialport/bindings,unix-dgram)
Other modules can be installed by 'npm install'.
Package Guidelines
See CONTRIBUTING.md file.
- 迅為i.MX6Q開發板Openwrt 文件系統構建
- KICAD插件使用說明書 8次下載
- TYPE C24PIN雙排插件原理圖 28次下載
- 12*12插件觸控開關原理圖 4次下載
- 4.5*4.5插件觸控開關原理圖 9次下載
- openwrt下面創建package之Makefile模版 0次下載
- USB數據抓包軟件程序下載 7次下載
- Openwrt通用固件 make menuconfig配置教程 4次下載
- OpenWrt路由器的使用教程資料說明 58次下載
- openwrt如何更換原有的Linux內核版本 0次下載
- Unity3D插件——LitJson下載 0次下載
- openwrt_wr703nv1固件和升級包 25次下載
- openwrt頁面升級整理 25次下載
- openwrt系統的使用技巧 30次下載
- OBS邊緣節點中變長數據包突發匯聚實現
- dfrobot面包板實驗插件——電阻包簡介 2007次閱讀
- dfrobot面包板實驗插件LED插件包簡介 1174次閱讀
- dfrobot面包板實驗插件電容包簡介 1440次閱讀
- 一文詳解OpenWrt系統架構和其他系統架構的對比 2.2w次閱讀
- 細數工具包Kanzi? UI及Kanzi Connect?其中每個插件實現的功能 1w次閱讀
- 基于OpenWrt的6LoWPAN邊界路由器的實現 3748次閱讀
- 基于OpenWRT智能家庭安防系統的研究與實現 3132次閱讀
- openwrt都有什么功能_openwrt詳細功能介紹_openwrt刷機教程 16.5w次閱讀
- 路由器刷openwrt好處_路由器怎么刷openwrt 17.1w次閱讀
- openwrt支持usb自動mount的功能 1.5w次閱讀
- openwrt是什么_openwrt有什么用 5.7w次閱讀
- openwrt啟動過程詳細分析 1.2w次閱讀
- openwrt如何修改為國內軟件源 2.8w次閱讀
- openwrt無線中繼設置步驟 7.9w次閱讀
- openwrt路由器配置方法技巧分享 9.9w次閱讀
下載排行
本周
- 1山景DSP芯片AP8248A2數據手冊
- 1.06 MB | 532次下載 | 免費
- 2RK3399完整板原理圖(支持平板,盒子VR)
- 3.28 MB | 339次下載 | 免費
- 3TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 4DFM軟件使用教程
- 0.84 MB | 295次下載 | 免費
- 5元宇宙深度解析—未來的未來-風口還是泡沫
- 6.40 MB | 227次下載 | 免費
- 6迪文DGUS開發指南
- 31.67 MB | 194次下載 | 免費
- 7元宇宙底層硬件系列報告
- 13.42 MB | 182次下載 | 免費
- 8FP5207XR-G1中文應用手冊
- 1.09 MB | 178次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191187次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多