電子發燒友App
創作
發文章
發帖 
提問 
發資料
發視頻資料介紹
Table of Contents
ezLINX? iCoupler? Isolated Interface Development Environment
The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower? digital isolator technology.
Quick Start Installation Setup Guide
The following guides give a complete step-by-step guide for the initial setup of the ezLINX board, including software installation for the ezLINX application, driver installation and setting the IP address. Before starting the setup guide, check that you have all of the necessary items from the following list to complete the setup process:
Evaluation Kit Contents
EZLINX-IIIDE-EBZ Evaluation board
USB A to mini USB B Cable
Power supply
ezLINX Software DVD
Installation Instructions
Select the operating system you are using from the list:
Windows XP Quick Start installation
Windows Vista 32-bit/64-bit Quick Start Installation
Windows 7 32-bit/64-bit Quick Start Installation
Hardware
The Hardware of the ezLINX iCoupler isolated interface development environment contains the ADSP-BF548 blackfin processor with 64MB of RAM and 32MB of Flash memory. The Isolated Physical layer communication standards are implemented using ADI's isolated transceivers with integrated iCoupler and isoPower technology. Routing between the various communication standards is implemented at the hardware level. Included are the following:
- Isolated USB using the ADuM3160
- Isolated CAN using the ADM3053 Signal and Power Isolated CAN transceiver
- Isolated RS-485/RS-422 using the ADM2587E Signal and Power Isolated RS-485/RS-422 transceiver
- Isolated RS-232 using the ADM3252E Signal and Power Isolated RS-232 transceiver
The ezLINX? Development Platform also includes the following:
- Hirose FX8 120P-SV(91) Extender Connector for daughter board connections.
A full list of jumper configurations for the ezLINX hardware can be found here.
Software
Sample PC Application Software
The ADSP-BF548 Blackfin processor is running open source uCLinux kernel and sample application. The sample PC Application integrates with the ezLINX hardware platform via isolated USB, allowing for a complete plug and play evaluation and development experience with 8 isolated communication standards.
Sample PC Application Software User guide
The sample PC Application is available for
- Windows XP
- Windows Vista
- Windows 7
Kernel Update Guide
The ezLINX board allows for the embedded kernel of the Blackfin? Processor to be updated with the latest version of the kernel image file. This will improve the functionality and reliability of the board.
For the step-by-step kernel update guide and the latest image file, follow the link below:
Kernel Restore Guide
If the kernel image file becomes corrupted then the ezLINX board cannot be connected to the PC application. In this case the factory reset feature can't be used and in order to re-establish the connection the kernel must be restored from the back-up location in the ezLINX board's flash memory. This process can also be used to revert the embedded software on the ezLINX board back to its original version.
For the step-by-step kernel restore guide, follow the link below:
Troubleshooting
Software License
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- MCGS 嵌入版用户指南0次下载
- EVAL-AD5940评估套件用户指南9次下载
- ezLINX USB漂流器1次下载
- ezLINX™示例PC应用程序源代码1次下载
- EzLINX™印制板制造文件11次下载
- ezLINX™示例PC应用程序安装1次下载
- ezLINX™ Sample PC Application Install0次下载
- MPLAB® XC16的详细用户指南58次下载
- MCP9600基础知识及评估板用户指南47次下载
- PSMC设计器用户指南及技巧4次下载
- MTCH112基础知识及用户指南17次下载
- MCP3903评估板用户指南25次下载
- Microchip 调试器（MDB） 用户指南8次下载
- TMS320C28X处理器汇编语言工具用户指南30次下载
- SEED-BLDC用户指南(for2812)20次下载
- 参考曲线状态评估指南486次阅读
- CD100M满杯检测方案的安装指南853次阅读
- Air780EP模块AT开发-HTTP应用指南954次阅读
- 电工必备接线指南：轻松掌握各种电路接线技巧4446次阅读
- 汽车网络安全-挑战和实践指南661次阅读
- OpenCV4.8+CUDA+扩展模块支持编译指南1219次阅读
- 滤波器设计指南2608次阅读
- MSPM0开发应用指南合集2658次阅读
- 泰凌微电子App使用指南——TelinkApps介绍5813次阅读
- AEM科技SolidMatrix® 和 AirMatrix® 保险丝产品选型指南1303次阅读
- 为什么电子指南针能指示方向2161次阅读
- 使用含快速开关SiC器件的RC缓冲电路实用解决方案和指南3035次阅读
- PCB设计之五个EMI设计指南3738次阅读
- firefly AIO-3288J主板使用指南1818次阅读
- iPhone自带的指南针的妙用7841次阅读
上傳資料賺積分下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
工商網監
評論